The production model of the busbar processing machine must be sharpened after being used for a long time, and the surface of the cutting edge must be demagnetized after grinding, and must not have magnetic force, otherwise it is easy to cause material blockage. Elastic parts such as springs are most easily damaged during use, and generally show disconnection and deformation. The method adopted by the busbar processing machine is to change. In the process of reforming, we must pay attention to the specifications and models of the springs. The specifications and models of the springs are clearly recognized by the three items of color, outer diameter and length, and only when the three items are the same. can be changed easily.
After operation:
During the use of the production model of the busbar processing machine, the punch is easy to show the phenomenon of climbing, buckling and gnawing, and the punching sleeve is generally gnawed. The damage of the punch and the punch sleeve is usually carried out with the same specifications of the parts. The parameters of the punch mainly include office local size, installation local size, length size, etc. Fasten parts, check whether the fastening parts are loose or damaged, and the method adopted is to find parts of the same specification for modification. Pressing parts such as pressing plate, excellent glue, etc., unloading parts such as stripping plate, pneumatic top material, etc.
2) Check whether the bending limit switch is loose,
During the maintenance and maintenance of the busbar processing machine, check the relationship between parts and whether there is any defect, repair the damaged part, check whether there is air leakage in the pneumatic top material, and take measures to deal with the specific situation. If the trachea is damaged, it will be easier to reform. According to the working current of the busbar processing machine, select the correct volume of the rated current of the busway. The volume of the rated current should be selected according to the standard current level of the busway product provided by the manufacturer.
2. The replacement of some printed circuit boards requires some specific operations after the replacement to complete the establishment of software and parameters.
The busbar processing machine is generally composed of the following units in the busbar trunking system: feeder busbar (without socket) or plug-in busbar (with socket) straight section unit; according to the number of conductors, it is equipped with three-phase four-wire system and three-phase Phase five-wire system (independent PE row is added, and some manufacturers provide aluminum alloy casing for group grounding PE). The incoming (outgoing) line unit of the busbar processing machine and the transformer, power distribution cabinet and other facilities interface; the reversing unit has L-shaped unit, T-shaped unit, Z-shaped unit; expansion unit has expansion joint busbar unit; plug-in unit has plug-in unit box unit. All units are generally pre-standardized by the busway manufacturer, and non-standard pre-setting can also be implemented after on-site survey according to the project requirements to meet the needs of users and installation. The busbar trunking system is generally used in transformers
2. The tooling die of the bending unit is a closed structure, and the horizontal processing method is adopted to ensure the structural strength of the bending unit. By changing the bending die, the flat bending, vertical bending, embossing and flattening of the workpiece can be completed.
Specializing in the production and sales of busbar processing machines, we provide you with professional and high-quality busbar processing machines. Welcome to inquire about busbar processing machine quotations.
(3) The machine tool coordinate cannot find the zero point. It may be that the zero direction is far away from the zero point; the encoder is damaged or the wiring is open; the grating zero mark is shifted; the zero return deceleration switch fails.