After any mechanical equipment is used for a long time, there will be a lot of dust and product debris attached to it, and the CNC busbar processing machine is no exception. If it is not cleaned in time, it may affect the normal use of the CNC bus processing machine. Therefore, for the CNC busbar processing machine, in addition to maintenance work, cleaning work is also more important. So how should the CNC bus processing machine be cleaned? Let me introduce to you below.
For the electrical control system, it may be that the speed loop, position loop and related parameters are no longer in the best matching state, and should be re-optimized and adjusted after the mechanical fault is basically eliminated.
1. Hot oil cleaning method. The bearing hardened with soft dry oil or anti-rust paste should be immersed in hot oil at 100-200 ℃, clamp the bearing with pliers, and use a brush to clean the oil on the bearing. Soft dry oil or anti-rust paste is heated to 100-200 ℃ to melt, and it is very easy to wash out from the gap of the bearing. Sometimes as long as the bearing is repeatedly shaken in the oil, the oil will flow away from the gap.
5. The cooling device should be started 30 minutes before the main transformer is put into operation.
When cleaning the old busbar processing machine motor or the radial spherical bearing of the imported motor, the balls, the ball carrier and the inner ring should be rotated laterally from the outer ring and then immersed in hot oil. The short cylindrical roller bearing should also be cleaned when cleaning. The rollers, ball carrier, inner and outer rings should be disengaged. During hot oil cleaning, the temperature of the oil should not exceed 20°C. If direct heating with an open flame, attention should be paid to avoid burning the oil. The bearing should be suspended in the oil pan and sinking to the bottom will cause overheating and reduce hardness.
1. Before starting the machine for the first time, fill the oil tank with oil to avoid damage to the oil pump. Be familiar with the performance, structure and operation method of the machine. Do not wear loose clothes to avoid danger.
2. General cleaning method. Soak the bearing in kerosene for 5-10 minutes, hold the inner ring with one hand, and turn the outer ring with the other hand, the dry oil or anti-rust paste on the bearing will fall off. Then put the busbar processing machine bearing into relatively clean kerosene, rinse it with a fine and soft brush, clean the oil stains in the ball and the gap, and then put it in gasoline to clean it once, take it out and put it on clean paper . When cleaning radial spherical ball bearings and short cylindrical roller bearings, the balls, the ball carrier, the inner ring and the outer ring should be separated and cleaned. The cleaning of the bearings installed on the shaft of the busbar processing machine mainly depends on the method of spraying oil or spraying with an oil gun. For the oil that is simply cleaned, first use kerosene and then gasoline; for the oil that is difficult to clean, use 100-200 ℃ first. Hot oil rinse or oil gun spray, then gasoline cleaning. We must pay attention not to scratch the bearing with sharp objects: hard grease or rust, to avoid damage to the smoothness of the bearing rolling body and groove ring, and dry the cleaned bearing with a clean cloth.
The overall shape is bright in color, the surface is painted, and it is treated with phosphoric acid skin mold for anti-rust treatment, which is wear-resistant and impact-resistant.
The busbar processing machine is suitable for making large-scale electric control boxes and construction sites of power transmission and distribution construction projects. Nowadays, there are many applications of busbar processing machines in people's lives. But for its longevity, pay attention to its cleaning and maintenance. So how should the bearing of the busbar processing machine be cleaned? Let me introduce to you below.
1. When purchasing a busbar processing machine, we need to determine the busbar processing machine to be purchased according to the technical requirements of the products to be processed, according to the technological process and production line rhythm. Only by purchasing the type that suits you, can the busbar be processed. The machine plays a better role, which is beneficial to our production and processing.
1. Hot oil cleaning method. Bearings hardened by soft dry oil or anti-rust paste should be immersed in hot oil at 100-200°C due to long-term use, clamp the bearing with pliers, and use a brush to clean the oil stains on the bearing. Soft dry oil or anti-rust paste is heated to 100-200 ℃ to melt, and it is easy to wash out from the gap of the bearing. Sometimes it's just a matter of shaking the bearing multiple times in the oil. Oil stains will also run away from the crevices.
2. When cleaning the old busbar processing machine motor or the radial spherical bearing of the imported motor, the ball, the ball frame and the inner ring should be turned out from the outer ring laterally and then immersed in hot oil, and the short cylindrical roller bearing should be cleaned. The rollers, ball carrier, inner ring and outer ring should also be disengaged when During hot oil cleaning, the temperature of the oil should not exceed 20°C. When heating directly with an open flame, care should be taken to prevent the oil from burning. The bearing should be suspended in the oil pan and sinking to the bottom will cause overheating and reduce hardness.
3. The cleaning of the bearings installed on the shaft of the busbar processing machine mainly relies on the method of spraying oil or spraying with an oil gun. The oil that is easy to be cleaned is first used kerosene and then gasoline; the oil that is difficult to be cleaned, first use 100-200 ℃ The hot oil rinse or oil gun spray, and then clean with gasoline. Be careful not to scrape the bearing with sharp tools to form hard grease or rust, so as not to damage the smoothness of the bearing rolling element and groove ring. Clean the bearing with a clean cloth.