The busbar processing machine is a matching equipment designed with reference to foreign advanced products and domestic actual conditions to improve work efficiency and ensure operational safety. It is suitable for making large-scale electric control boxes and construction sites of power transmission and distribution construction projects. So what are the methods of thread processing for busbar processing machines? Let me introduce to you below.
When we use the busbar punching and shearing machine, the simplest point is that the power supply needs to be connected, and then the busbar punching and shearing machine can work normally, but when we connect the power supply, we may encounter the problem of the busbar punching and shearing machine switch tripping.
1. Straight forward method; the thread cutter is intermittently fed to the depth of the tooth. When this method is used to process trapezoidal threads, all three sides of the thread turning tool are involved in cutting, resulting in difficulty in chip removal, increased cutting force and cutting heat, and increased cutting edge. Serious wear, when the feed amount is too large, it may also cause the phenomenon of knife sticking. Obviously, machining large pitch trapezoidal threads and worms is not advisable.
2. Power requirements
2. Incline method. The thread turning tool is fed obliquely and intermittently to the depth of the tooth along the profile angle direction. When this method is used to process trapezoidal threads, only one edge of the thread turning tool always participates in cutting, so that the chip removal is relatively smooth, and the force of the tool tip and the The heating condition has been improved, and it is not easy to cause the phenomenon of knife sticking in turning.
The above content mainly introduces some main factors that affect the performance of the busbar processing machine, hoping to help you understand more and improve production efficiency.